The Wondercap Kit is installed pre-concrete pour or in a timber floor application and will continue to provide total protection from the initial stages of construction to completion.
The whole kit provides total protection of the waste pipe from the initial stages of construction to completion; preventing concrete and other waste materials going down the waste pipe causing blockages. The foam ring also prevents concrete settling in between the base and puddle flange during the concrete pour and is then removed once concrete is set.
The recessed puddle flange provides extra strength and protection of the waterproofing membrane around the shower and floor waste riser. It also comes with a foam ring to prevent concrete settling in between the base and flange during the concrete pour.
The recessed flange and base allow for a tile height of up to 100mm above the subfloor and assist in achieving an accurate datum (fall/pre-slope), of varying heights, to the floor waste and ensures a perfect alignment every time.
Included with the Puddle Flange Kit is the Wondercap Base. Developed with patented primary and secondary weep holes, the Wondercap base allows moisture to drain from the bedding and under the tiles after construction is completed. Manufactured from a non-stick, non-stain polypropylene, the Wondercap base insert provides a hygienic and environmentally friendly transition from the floor grate to the shower and floor waste riser. During the manufacturing process, the polypropylene is injected with an antibacterial agent preventing the growth of bacteria and mould; helping with odour control and improving hygiene maintenance.
Fits 100mm grates.
*Can also compliment 80mm grates by cutting an appropriately sized hole in the cap.