Wondercap Retro Puddle Flange Kit

Step 1

Install your Retro Kit with silicone and 4 screws into your concrete sheeting or timber flooring. Be sure to use plumbing glue to connect your puddle flange to your floor waste piping.

Step 2

Silicone seal your edges, any holes, and the edges of your puddle flange (retro Kit). Proceed to prime your shower drain for the waterproofing paint.

Step 3

Spread and smooth your silicone around all your edges. Allow to dry for a couple minutes prior to applying your polyurethane waterproofing paint.


Step 4

Apply your first layer of polyurethane waterproofing paint to the edges. Place your first piece of bandage strip to the edge.

Step 5

Proceed to paint the entire base and edges on top of the bandage strips. Place additional bandage around the drain.

Step 6

Once the waterproofing membrane has cured after 24 hours, place your test plug in the drain and fill the base with water.


Step 7

Re-insert your base into the puddle flange and secure the height as wished by applying your bedding to the tiling area.

Step 8

Leave the bedding to dry for 24 hours, then start measuring your tiles.

Step 9

Once you have cut your tiles, start applying your tile glue. Then apply it to the back of the tiles and place gently.


Step 10

Be sure to tile neatly and gently. Adding tile glue to the back of each tile is important to stop and air pockets.

Step 11

Mix up your grout and gently add to the edges between the tiles and the grate.

Step 12

Allow grout and tile glue to dry for 24hrs and then wipe down with a damp cloth or sponge to remove grout powder.


Includes

  • Protective cap
  • Adjustable base

Provides

  • Correct fall to the floor and shower drain hole
  • Achieve accurate screed/bedding levels
  • Protection from construction waste entering the drainage
  • 100% accurate positioning of grate over drain hole
  • Active moisture drainage through our patented weep-hole technology
  • Hygienic protection
  • Customer satisfaction

Flexibility

Sizes for transition from 100mm grate to

  • 100mm drainage pipe
  • 80mm drainage pipe
  • 50mm drainage pipe

Ideal For

  • Shower and floor drains
  • Bathroom, shower, laundry, ensuite
  • Construction and renovation
  • Outdoor patios, balconies and paved areas
  • Planter drain outlets

Includes

  • Protective cap
  • Adjustable base

Provides

  • Correct fall to the floor and shower drain hole
  • Achieve accurate screed/bedding levels
  • Protection from construction waste entering the drainage
  • 100% accurate positioning of grate over drain hole
  • Active moisture drainage through our patented weep-hole technology
  • Hygienic protection
  • Customer satisfaction

Flexibility

Sizes for transition from 100mm grate to

  • 100mm drainage pipe
  • 80mm drainage pipe
  • 50mm drainage pipe

Ideal For

  • Shower and floor drains
  • Bathroom, shower, laundry, ensuite
  • Construction and renovation
  • Outdoor patios, balconies and paved areas
  • Planter drain outlets